×

section width meaning in English

断面宽度

Examples

  1. Short - limbed wall ( slw ) is defined as the shear wall with a ratio of section depth to width ( rdw ) being 5 - 8 . usually , the section width is 200 - 250 mm , and the depth is between 1 000 and 2 500 mm
    短肢剪力墙是指墙肢截面高度与厚度之比为5 8的抗震墙,通常墙厚不小于200mm ,肢长在1000 2500mm之间,它介乎于异形框架柱和一般剪力墙之间。
  2. As is well known , the effective width depends on several factors , such as the cross - section width , the height of web , the spacing of span and so on . we can conclude that width / span ratio ( overhang width / span and central width / span ) is the governing factor of the effective width
    影响箱形截面梁上翼缘有效宽度的因素很多,如上翼缘宽度、梁高、跨度以及结构体系等,通过大量计算表明宽跨比[翼缘部分宽度、箱室部分宽度与跨度的比值]是有效宽度的控制影响因素。
  3. The work done in this paper is mainly as follows : ( 1 ) the wide beam should intrude to the wall at some length to make the flexural stress uniform along beam section width , thus make full use of the beam ' s bearing capacity and avoid the shear failure in the concrete joint . and it also prevents stress focus and concrete crack in the local shear wall
    关于宽梁与薄墙肢节点,可以得出以下几点初步结论:宽梁应该深入墙肢一定的深度,以使宽梁截面的弯曲应力沿着梁截面宽度分布均匀,充分发挥宽梁的抗弯能力,同时避免节点区混凝土的剪切失效,也避免剪力墙的局部因为受到的应力过大而拉裂。

Related Words

  1. damping width
  2. channel width
  3. in width
  4. sectional width
  5. stride width
  6. regime width
  7. flange width
  8. stream width
  9. wdth width
  10. various widths
  11. section wave
  12. section wave drag coefficient
  13. section wire
  14. section wire method
PC Version

Copyright © 2018 WordTech Co.